Kontron's 3u VPX Single Board Computer VX3058 is based on the highly integrated 8-core Intel® Xeon® D architecture, supporting Dual 10 Gigabit Ethernet, high bandwidth PCI Express 3.0, and high speed DDR4 memory. It is consequently SWaP-C optimized with versatile mezzanine options for XMC, storage, graphics, M.2, and I/O. Combined with Kontron's advanced switch technologies and VxFabricTM for significantly higher I/O bandwidth, and combined with centralized health management, VX3058 is simply the best choice for high performance embedded computing platforms.
VX3058 brings server class applications into the battlefield
Typical programs are :
VX3058 and leading edge architecture for Multi-CPU computing nodes
VX3058 provides two 10 GBASE-KR ports and 8 lanes Gen3 PCI Express to the backplane. A 10 Gigabit Ethernet switch and a PCI Express Switch can be complemented with two respective single star data planes. Thanks to Kontron VxFabricTM, a unique API extends the TCP/IP protocol over the PCI Express infrastructure. Kontron’s sample turnkey system StarVX implements this architecture, enabling a significantly higher I/O bandwidth. While computing power has been continuously increasing in the past, and I/O bandwidth did not, the balance of both is back again by Kontron StarVX. VX3058 makes it a powerful, leading edge Multi-CPU computing node architecture.
Long term programs: high reliability and low Total-Cost-of-Ownership
Kontron provides a Long Term Supply program service (LTS) for over 15 years. Intel communicates silicon reliability is 10 years. A comprehensive Health Management is optionally available to support easy field maintenance. All this makes the VX3058 the ideal candidate for long term programs.
|Processor||Intel® Xeon® D-1500 Octa Core™, TDD 35W, 1.6/1.7 GHz (8 execution cores, 16 threads, 12 MB)
DDR4 dual channel memory with ECC, 2133 Mbits/s over 144 bits, up to 16 Gbytes
PCIe gen3 x8 ports to VPX and XMC, up to 8 GT/s
|Form Factor||3U VPX, 1’’ (5HP)
Slot profile: SLT3-PAY-2F2U-14.2.3, SLT3-PAY-1F1F2U-14.2.4, SLT3-PAY-1F1U-14.2.10
|Main Memory||Up to 32 GB dual channel DDR4 SDRAM running at 2133 MT/s, with ECC, soldered|
|Available I/Os||Front Panel
USB: 1x USB 2.0 port
GIGABIT ETHERNET: 1x RJ-45 connector: 10/100/1000BASE-T Ethernet Note: This port is configurable from the BIOS to be routed to the VPX rear connector
HDMI (OPTION): HDMI connector as option. This includes a HDMI front-I/O module and a M.2 mezzanine for 2D graphics. Remark: HDMI front I/O and XMC support are exclusive.
SERIAL: 1x RJ-11 connector: Two EIA-232 interfaces or one EIA-485 interface without hardware flow control
LEDS: 5 LEDs reporting the board CPU health status and activity
RESET: Push button
PCIe: x8 PCIe 3.0, non-transparent capability, on P1. Configurable as 1 x8, 2 x4, or 4 x2
SATA: 2 SATA 6 Gb/s links on P1, 2 additional SATA 6 Gb/s links on P2
USB: 2 USB 2.0 and 1 USB 3.0 port on P1, 1 additional USB 2.0 link on P2
UART: Two serial lines (Rx, Tx only) on P2, for RS-232 or RS-422/485 dynamically configured
Ethernet: Two 10GBASE-KR or 1000BASE-KX on P1, one 1 1000BASE-T on P1, 2nd 1000BASE-T on P2 (both front/rear switchable, onboard magnetics)
GPIO P1: GPIO1, GPIO2/Maskable reset, OpenVPX GDISCRETE1, VBAT
GPIO P2: SYSCON. 2x multiplexed GPIO3/4 or SFI I2C
Video: DVI port on P2 as option. This includes a M.2 mezzanine for 2D graphics.
|Security||Dual secure elements, TPM and Wibu, which can be enhanced with Kontron SEC-LINE product|
|Watchdog||PLD-based, timeout ranging from 2 µs to 510s, IRQ, Reset, dual-stage|
|Flash||2x16 MB FLASH, with recovery image and uEFI BIOS settings|
|Power Supply||On P0: VS1=12V and 3.3V_AUX; VS2 not used; VS3=5V not used; -12V_AUX for XMC slot option|
|Drives||60 GB SSD M.2 Option|
|Cooling||Air, Extended Temperature Air, and Conduction-cooled options|
Octo Core VPX Server Blade
[ vx3058-datasheet-09-2015-1.pdf, 1.8 MB, Aug.31.2017 ]
VME-VPX shortform catalog
[ shortform-vme-vpx-05-2018.pdf, 2.27 MB, May.16.2018 ]
Kontron Modular Computers S.A.S. Service and Support Offering
This data sheet contains a detailed description of all the support and service offering from Kontron Modular Computers S.A.S, including the Long Term Supply (LTS) Services.
[ support-brochure-03-2018.pdf, 894.71 KB, Jun.28.2018 ]
VX3058 User's Guide
[ cadtb25-0e-vx305x-ug-preliminary.pdf, 4.17 MB, Sep.11.2017 ]
VX305x AMI BIOS User Reference Manual
[ sddtg50-5e-vx305x-bios.pdf, 3.68 MB, Feb.12.2018 ]
VX305x PBIT User's Manual
[ sddtg51-0e-vx305x-pbit-ug.pdf, 1.06 MB, Sep.11.2017 ]
General Safety Instruction
[ 0_0096_4370_v2_2_d_e_2019-10-15.pdf, 111.84 KB, Oct.29.2019 ]
VXFabric White Paper
[ whitepaper_en_vxfabric-v2-final.pdf, 5.87 MB, Nov.27.2013 ]
Kontron Services Brochure
[ kontron-services-brochure.pdf, 390.7 KB, Sep.06.2019 ]
Alle weiteren Downloads (Treiber, Downloads etc.) finden Sie auf Kontrons Customer Section
Aktuell sind keine Produkte zum Vergleich selektiert.
To find out more about our services go to services pages